Ashcatchers / Pre-Coolers

The advantage of an ash catcher is that your bong or pipe will stay free of any ashes, particulates, and most of the tar and resin. Check out our cool selection of ash catchers!

ROOR Dry Ash Catcher 2.0

Out of stock

-12%

Heisenberg Inline Precooler Clear 2.0

Out of stock

-9%

Chongz Clear Off Male to Female Glass Precooler with Double Perc

Out of stock

Glasscity Recycler Precooler with Inline Diffuser | 90° Joint

Out of stock

-10%

Thug Life Precooler with 6-Arm Tree Perc | 18.8mm

Out of stock

-12%

Grace Glass Precooler with Honeycomb Disc Perc | Green | 18.8mm

Out of stock

-10%

Thug Life Precooler with Matrix Perc | 18.8mm

Out of stock

-10%

WS Heisenberg Clearcutter Glass Precooler | 18.8mm

Out of stock

Glasscity Limited Edition Pre-Cooler with Double Perc | 90° Joint

Out of stock

Glass Recycler Pre-cooler with Showerhead Diffuser | 45 Degree Joint

Out of stock

Blaze Glass Spiral Pre-cooler with Cooling Liquid

Out of stock

-9%

Grace Glass Precooler with Drum Percolator | 18.8mm | Blue

Out of stock

Glass Ashcatcher with Spiral Percolator | Green

Out of stock

-10%

Black Leaf HoneyComb Precooler with Inline Perc and 90 Degree Joint

Out of stock

WS Heisenberg HNBG Glass Precooler | 18.8mm

Out of stock

-10%

WS Tusk Double Wall Precooler 18.8 mm

Out of stock

-9%

WS Sprayer Precooler 18.8 mm

Out of stock

-9%

WS Honey Precooler 18.8 mm

Out of stock

-9%

WS Grenade Precooler 18.8 mm

Out of stock

WS - Big Precooler 18.8 Neon-Line - Blue

WS - Big Precooler 18.8 Neon-Line - Choice of 5 Colors

Out of stock

Grace Glass - Limited Edition Precooler with HoneyComb Disc Perc and Showerhead Diffuser - Black

Grace Glass - Limited Edition Precooler with HoneyComb Disc Perc and Showerhead Diffuser - Choice of 4 colors

Out of stock

-10%

Blaze Glass - Recycler Precooler with HoneyComb Disc - 45 Degree Joint - 18.8mm

Out of stock

-10%

Blaze Glass - Recycler Precooler with HoneyComb Disc - 45 Degree Joint - 14.5mm

Out of stock

-10%

Blaze Glass - Recycler Precooler with HoneyComb Disc - 90 Degree Joint - 14.5mm

Out of stock

-10%

Blaze Glass - Recycler Precooler with HoneyComb Disc - 90 Degree Joint - 18.8mm

Out of stock

FAQ Ash Catcher

FAQ

What is an Ash Catcher?

An ash catcher is a water filtration device which works almost identically to a bong. In an ash catcher, a series of glass tubes draw smoke from a bowl and pass it through a chamber filled with water. Attaching to a front of a bong, an ash catcher (also sometimes referred to as a pre-cooler) acts as a sort of “bong within a bong.”

What does an Ash Catcher bowl do?

By performing a step of water filtration before the smoke enters your bong proper, the Ash Catcher effectively removes any ashes, particulates, and most of the tar and resin that would otherwise accumulate in your bong.

The result of adding this extra filtration? A smoother hit and a cleaner bong.

How to use an Ash Catcher?

Attach your ash catcher the same way you take your bowl in and out of the water pipe. Your bowl will first go into the ash catcher instead of directly into the water pipe. When you take a hit, the burned ash will get trapped in the ash catcher instead of passing into the water pipes main chamber.

Do you put water in an Ash Catcher?

In some cases it is possible to put water in an ash catcher, but don’t put in too much water. Otherwise, the dirty water will flow back into your bong or pipe. Keep the waterline below your downstem, to avoid a splash back effect.

How to clean an Ash Catcher?

The best way to clean your ash catcher is to pour in 90% isopropyl alcohol and coarse salt. Shake well before you pour out the alcohol and afterwards rinse your ash catcher with warm water. You can also use one of our bong cleaners.

Percolator Attachment

An Ash Catcher is basically a Percolator Attachment. It helps upgrade your simple bong into a bong with pre-filtration just like a percolator bong. While percolator bongs might look a bit fancier, Pre-coolers get the job done just as well. Upgrade your bong now.

14MM Ash Catchers

14MM Ash Catchers are the most common size for Ash Catchers. The size stands for the width of the connector that connects with your bong. This has to correspond with your bong’s joint size. The joint is the tube that usually holds your bowl. If you don’t know your joint size you can measure this at the inside of the joint.

18MM Ash Catchers

18MM Ash Catchers are the second most common size ash catchers. As with the other size Ash Catchers, you have to measure the outside of the Ash Catcher joint and the inside of the Bong Joint to make sure they correspond.

45° Ash Catchers and Pre-coolers

45° are made to use with most beaker base bongs. It is important to check the angle on your bong because you want the top of the precooler to be level. That way your herbs can’t fall out and the water is level and won’t spill.

90° Ash Catchers / Pre-coolers

If you like to enjoy smooth hits with a straight tube bong a 90° ash Catcher is probably the way to go. The 90° angle is necessary to make sure water doesn’t spill and your precious herbs don’t fall out. Be sure to check the direction of the joint on your bong to choose the right Ash Catcher.

We don't ship to Singapore

Ashcatchers / Pre-Coolers